Does your phone and dash surface match
The magnetic ring is built to line up with iPhone 12 through 16 and newer models, so those phones hold without adding anything to the back. Older iPhones and Android phones need the included magnetic ring fitted first, and that ring is what gives them the same hold.
We recommend checking both halves of the fit before you buy. The phone side decides whether you need the ring at all, and the dashboard side decides whether the vacuum base has anything to grip.
| Product detail | Value to match to your vehicle |
|---|---|
| Product | Baseus VC2 Flex Pro Mobile Phone Car Holder |
| Model | VC2 Flex Pro |
| Color | metallic |
What 15W charging actually tells you
The supported job here is holding a phone in view and topping it up, and the 15W figure describes the charging ceiling, not the result. Phones and cables set their own limit, so a handset that draws less will draw less no matter what the mount advertises.
Treat this as a phone holder with charging, not a substitute for a wall charger. The 15W rating says nothing about diagnosing a car, a battery or a dead electrical fault, and a lower price on a mount should never be read as an all-clear for a vehicle problem.
Supported role: hold the phone and deliver up to 15W
Not a diagnostic tool for vehicle faults
What the September price looks like
- Amazon price
- $36.97
- Customer rating
- 4.2
- Customer reviews
- 222
- Typical price over 90 days
- $60.08
- Difference
- $23.11 (38 percent)
At $36.97, this mount sits $23.11 below the typical price over the last 90 days of $60.08, which works out to 38% off. It is also the lowest price on record for this mount, measured across the all-time window, so there is no waiting game to play here.
For a wireless charging mount that folds flat, that is a fair place to buy if the fitment lines up.
The power and mounting checks that decide it
The base locks by twisting the vacuum seal against the surface, and Baseus rates the hold at up to 120 lbs. The gel is washable, so a dusty dash is a clean-up job rather than a replacement. Confirm your chosen spot before you commit, because leather, faux leather, grained trim, glass and plastic are all listed as surfaces this works with, and the seal only performs on the one you actually use.
The charging side needs a cable running to the mount, and the 15W figure is the ceiling, so check what your phone accepts and what your car outlet can supply before you expect a specific charge rate. Two built-in cable connections are part of the design, so think about how you want the cord routed along your dash.
Who should choose this mount
Choose it if you drive an iPhone 12 through 16, want a magnetic mount that also charges, and like the idea of a base you can reposition with a twist instead of adhesive. The folding arm and the 720 degree movement suit people who mount the phone in different spots and want a clean view without a cradle in the way.
We would skip it if you drive an older iPhone or an Android phone and do not want a ring on the back of the case, or if you want a mount that grabs the phone mechanically rather than magnetically. If neither of those applies, the last thing to confirm is that your phone takes the charge rate the mount can deliver and that the seal sticks to the surface you have in mind.
Specifications
| Model | VC2 Flex Pro |
|---|---|
| Color | metallic |