Start with the speaker opening under your factory grille
The Pyle PL714BL is a pair of four-way speakers sized for common 6x9 and 7x10 openings. The high-temperature voice coil and piezo tweeter sit on a blue poly injection cone, with a 4-ohm impedance that suits the factory wiring in many modern cars.
We'd consider this pair for a factory location that already takes a 6x9 or 7x10 speaker, because the 60 oz magnet structure and 4-ohm load are aimed at working with the radio you have now. Measure the cutout and the depth behind it before you buy.
| Product detail | Value to match to your vehicle |
|---|---|
| Product | Pyle 6x9/7x10 car Speakers 4-Way Quadriaxial Full |
| Model | PL714BL |
| Color | Blue |
| Size | 7'' x 10'' |
What the Pyle four-way speakers will not do
The four-way array, including the piezo tweeter, is built to raise high-frequency output while keeping a traditional sound. It is not a component system with separate crossovers, and it will not repair a dead channel or a head unit.
A 500-watt maximum rating does not mean a factory radio delivers that power. A 4-ohm load is what this pair expects, so confirm your vehicle's factory impedance if you plan to connect an external amplifier.
Factory stereo power is usually a fraction of the 500-watt maximum, so set expectations around loudness.
The 4-ohm load is what this pair expects; check the impedance your vehicle's wiring presents before adding an amp.
The price to compare against
- Amazon price
- $54.99
- Customer rating
- 4
- Customer reviews
- 58
- Typical price over 90 days
- $74.86
- Difference
- $19.87 (27 percent)
At $54.99, the pair is $19.87 below the typical price over the last 90 days of $74.86, which works out to 27 percent off.
That typical price over the last 90 days is a benchmark, not a deal, so treat the saving as a reason to act on the pair you already planned to buy. Rated 4 out of 5 from 58 reviews.
Power, mounting and cable routing to confirm
Check for window regulators, door bars or trunk springs behind the mounting hole before you commit to the cutout, because a speaker that is too deep will not sit flush.
A 13-foot power cable is listed, which you can use to plan routing from the head unit to the rear deck or doors. Confirm your factory grille clears the tweeter assembly, and check whether you need adapter rings or new speaker wire before the panels go back on.
Who should choose this Pyle pair
Choose it if your car has standard 6x9 or 7x10 openings, your factory speakers sound flat and you want a budget four-way replacement that works with the radio already in the dash.
Skip it if you are chasing big amplifier power, need separate component drivers, or cannot measure the cutout first. A pair that does not fit your door is a saving you cannot use.
Confirm the opening, the mounting depth and the 4-ohm match on your vehicle before you add it to the cart.
Specifications
| Model | PL714BL |
|---|---|
| Color | Blue |
| Size | 7'' x 10'' |
Guides from the desk
Preferred source
See more TunedDrive on Google
Select TunedDrive in Google’s source preferences. It takes a few seconds and costs nothing. Our car news, reviews and fixes become more likely to appear in your Top Stories, and AI Overviews can mark them as preferred.